Rollcall

Rollcall is a small, self-contained commissioning service for bare-metal servers, in the spirit of MAAS enlistment and commissioning, without the rest of MAAS.

A server that PXE-boots for the first time gets an ephemeral Debian live image. The image takes a full hardware inventory (DMI, DIMMs, CPUs, disks, NVMe, NICs, InfiniBand HCAs, GPUs, PCI, LLDP neighbours, TPM), creates an administrator account on the server's BMC through in-band IPMI, reports everything to the Rollcall server and powers the machine off. From then on the server is known: it shows up in the web UI and the CLI, its BMC can be driven through the API, and it will not boot the commissioning image again unless you ask for it.

Everything server-side is one static Go binary: HTTP API, embedded web UI, CLI, PostgreSQL schema management and the PXE bookkeeping.

How it works

unknown server ──PXE──▶ dnsmasq (DHCP+TFTP) ──▶ pxelinux default menu
                                                  │ 8 s timeout
                                                  ▼
                               Debian live image over HTTP (kernel+initrd via TFTP,
                               squashfs via HTTP, runs entirely from RAM)
                                                  │
                      rollcall-agent: inventory + BMC user + POST /api/v1/commission
                                                  │
                     rollcall server: PostgreSQL ◀─┘──▶ writes pxelinux.cfg/01-<mac>
                                                       (next boot: "commissioned → power off")

• Enlist: a machine is identified by its DMI system UUID (fallback: serial, then boot MAC). First contact creates it in state new.
• Commission: the inventory upload moves it to ready. The BMC password the agent generated is sealed with AES-256-GCM (key in /etc/rollcall/master.key) before it touches the database. It never leaves the server again: power and boot-device operations run ipmitool server-side.
• Re-commission: removes the per-MAC PXE override; optionally sets bootdev=pxe and power-cycles the machine through its BMC.

Repository layout

Path	What
cmd/rollcall/	Go server + CLI + embedded web UI (web/)
agent/	rollcall-agent.py (runs inside the live image), its systemd unit, build-image.sh (live-build recipe)
deploy/	install.sh (region), install-rack.sh + rack.example.json (rack controller), units, config.example.json, os-sources.json, tags/, overlays/
images/	stateless root image recipes (build-rootfs.sh, compute-debian13/)
lab/	Proxmox test lab: pve-vbmc (virtual IPMI BMC for VMs backed by the Proxmox API), cloud-init for the PXE server VM
site/	Project website (static)
.gitea/workflows/	CI (fmt/vet/build/tests), release on tags, deploy on push to main

Server

New site: INSTALL.md (deploy/bootstrap.sh, from day 0 without a network plan to the first deployed machine). The steps below are the manual equivalent.

# build
cd cmd/rollcall && CGO_ENABLED=0 go build -trimpath -ldflags="-s -w" -o rollcall .

# PostgreSQL role + database
sudo -u postgres psql -c "CREATE ROLE rollcall LOGIN PASSWORD '...';" -c "CREATE DATABASE rollcall OWNER rollcall;"

# config (see deploy/config.example.json), tokens from `rollcall keygen`
sudo install -d -m 0750 /etc/rollcall && sudo install -m 0640 config.json /etc/rollcall/config.json

# install binary, systemd unit, pxelinux menu, tftp symlinks
cd deploy && sudo ./install.sh

config.json keys: listen, image_dir (served under /rollcall/), tftp_root, database_url, master_key_file, admin_token (web UI + management API), agent_token (what the live image presents), commission_append (kernel command line baked into generated PXE files), bmc_hints (out-of-band BMC mapping for machines without in-band IPMI, e.g. VMs).

Console (same binary)

A bare rollcall in a terminal opens a full-screen console, built like the llmgw one (Bubble Tea): the fleet down the left (Overview, Machines, Racks, Jobs, Events) and provisioning (Tags, Profiles, OS images), the chosen page on the right, keys along the bottom. It is keyboard only, so it works on serial consoles and BMC KVMs.

• Machines: / filter (name, serial, MAC, IP, rack, tag), s cycles the state filter, Space selects, * selects everything shown, Enter opens a machine, a opens the actions for the selection or the current row: power, boot device, deploy OS, assign/unassign profile, tags, location, re-commission, release, cancel job, delete. Destructive ones ask first.
• Racks: Enter shows the elevation; Enter on a unit opens that machine.
• Jobs and events open the machine they belong to; tags, profiles and OS images show their definition. r refreshes (it also refreshes on its own, every 3 s while a job runs), ? lists the keys, q quits.

On the server as root it reads /etc/rollcall/config.json. Anywhere else it asks for the server URL and admin token once and keeps them in ~/.config/rollcall/client.json (mode 0600), which the CLI then uses as well. In a pipe or a script a bare rollcall prints its help as before. rollcall tui -dump 140x40 -page machines -plain renders one screen to stdout.

CLI (same binary)

rollcall list
rollcall show m-2ef1dab828c8 [-json]
rollcall events m-2ef1dab828c8
rollcall power m-2ef1dab828c8 status|on|off|soft|cycle|reset
rollcall bootdev m-2ef1dab828c8 pxe|disk|cdrom|bios|none
rollcall recommission m-2ef1dab828c8 [-now]
rollcall delete m-2ef1dab828c8

Reads ROLLCALL_URL / ROLLCALL_TOKEN, or the config file when readable.

API

Method	Path	Auth	Purpose
POST	/api/v1/commission	agent token	inventory upload from the live image
GET	/api/v1/bmc-hint?macs=	agent token	out-of-band BMC hint for VMs
GET	/api/v1/machines	admin	list (summaries)
GET	/api/v1/machines/{id}	admin	full record: inventory, BMC (no secret), events
POST	/api/v1/machines/{id}/power	admin	{"action":"on"} etc., runs ipmitool server-side
POST	/api/v1/machines/{id}/bootdev	admin	{"device":"pxe"}
POST	/api/v1/machines/{id}/recommission[?now=1]	admin	boot the image again on next PXE (now=1: via BMC immediately)
DELETE	/api/v1/machines/{id}	admin	forget the machine
GET/POST/DELETE	/api/v1/profiles[/{name}]	admin	stateless profiles
POST	/api/v1/machines/{id}/assign /unassign	admin	stateless node assignment
GET	/api/v1/os	admin	OS image catalog
POST	/api/v1/machines/{id}/deploy	admin	{"os":"rocky-9","disk":"/dev/sda","hostname":"","package_upgrade":false,"boot":true}
POST	/api/v1/machines/{id}/release	admin	wipe job
GET / POST	/api/v1/machines/{id}/jobs[/cancel]	admin	job history / cancel
GET	/api/v1/jobs/self, POST …/progress	job token (X-Rollcall-Job)	deploy agent
POST	/api/v1/phone-home/{token}	job token in path	cloud-init phone_home
GET	/os/*	none	OS disk images
GET	/rollcall/*	none	image files (kernel, initrd, squashfs)
GET	/	token in browser	web UI

Admin auth is Authorization: Bearer <admin_token>; the agent sends X-Rollcall-Token.

Commissioning image

agent/build-image.sh builds a Debian 13 live image with live-build (about 8 minutes, ~780 MB squashfs). It contains the full Debian kernel with non-free firmware, ipmitool, freeipmi, rdma-core, infiniband-diags, mstflint, nvme-cli, smartmontools, lldpd, lshw and an SSH server (root, key only) for debugging. Output goes to image_dir.

Kernel parameters understood by the agent: rollcall.server=URL (required), rollcall.token=…, rollcall.bmcuser=NAME (default commissioner), rollcall.nopoweroff (stay up after reporting).

BMC account

In-band (/dev/ipmi0): find the LAN channel, pick the existing commissioner slot or the first empty user ID ≥ 3, set name/password, ADMINISTRATOR privilege, channel access, enable, SOL payload. The password is random (16 chars) and is reported once to the server. If no in-band IPMI exists the agent asks the server for a hint (bmc_hints) and verifies it out-of-band.

Vendor quirks (iDRAC/iLO password policies, missing empty slots) are reported in bmc.errors and visible in the UI.

Stateless nodes (Warewulf-style)

For HPC compute nodes Rollcall can boot a root image straight into RAM and dress it with per-node files, instead of installing an OS on disk.

• Images live in images_dir/<name>/{vmlinuz,initrd.img,filesystem.squashfs} and are built with images/build-rootfs.sh <name> from images/<name>/{packages.list,hook.chroot,includes/} (live-build, same toolchain as the commissioning image). images/compute-debian13 is a Debian 13 compute node: slurmd, munge, rdma-core, NFS client, firmware.
• Profiles bind an image to overlays, extra kernel parameters, a node name format (node%03d) and variables: rollcall profile add compute -image compute-debian13 -overlays compute.
• Assigning a commissioned machine to a profile allocates a node name and IPs from node_pools, writes a per-MAC PXE entry that boots the image with hostname=, rollcall.server= and a per-node token, and exports static DHCP leases plus host names for dnsmasq (dnsmasq_dir, re-read on HUP via rollcall-dnsmasq.path). rollcall assign <id> compute -boot also power-cycles the machine through its BMC.
• Overlays are directory trees under overlays_dir/<overlay>/{system,runtime}; files ending in .tmpl are Go templates rendered with the node, all nodes of the cluster, the profile and cluster_vars. The compute overlay generates /etc/hosts, slurm.conf (node lines from the commissioning inventory: sockets, cores, threads, memory, GPUs), gres.conf, a persistent SSH host key per node (sealed in the database), root authorized_keys and the munge key. Inside the image rollcall-overlay.service applies the system overlay before munge/slurmd/ssh start; a timer refreshes the runtime overlay every five minutes, which doubles as the node heartbeat (booted state, last seen).
• The controller renders the same files: rollcall render compute etc/slurm/slurm.conf > /etc/slurm/slurm.conf.

States: ready → stateless → booted; rollcall unassign releases name and IPs.

OS deployment (install to disk)

For nodes that should run an operating system from their own disk, Rollcall writes a vendor cloud image onto the disk and lets cloud-init do first-boot configuration. No installer, no kickstart/preseed: a deployment is a streamed disk write and takes about as long as the image download.

rollcall deploy <id> rocky-9 -boot -watch
   │ server: picks the disk (smallest that fits, or -disk), allocates hostname + IP,
   │         creates a job with a one-time token, writes pxelinux.cfg/01-<mac>
   │         ("deploy" entry = commissioning image with rollcall.mode=deploy), power-cycles via BMC
   ▼
commissioning image, deploy mode (agent/rollcall-deploy.py)
   GET /api/v1/jobs/self        → image URL, sha256, disk, rendered cloud-init seed
   curl | tee sha256 | pv | zstd -d | dd of=/dev/sda      (progress every 3 s)
   mount root fs → /var/lib/cloud/seed/nocloud/{meta-data,user-data}, datasource_list: [NoCloud, None]
   (SELinux images: /.autorelabel; UEFI hosts: efibootmgr entry for the ESP loader)
   POST progress state=done  → server: state deployed, PXE entry = local disk, reboot
   ▼
first boot: cloud-init sets hostname/fqdn, SSH keys (root + default user), optional
package_upgrade, then phone_home → POST /api/v1/phone-home/<token> (shown as "phoned home")

Image catalog and freshness

os_dir/<name>/<version>/disk.raw.zst     raw disk image, zstd
os_dir/<name>/<version>/meta.json        sizes, sha256, upstream checksum, import time
os_dir/<name>/current -> <version>       what new deployments use

os_sources (deploy/os-sources.json) lists upstream "latest" URLs with the vendor checksum file for each: Debian 13, Ubuntu 24.04, Rocky 9, AlmaLinux 9, CentOS Stream 9. rollcall os sync fetches the checksum file, and only when the vendor checksum differs from every imported version does it download the image, verify it, convert to raw (qemu-img), compress, write a new version directory and flip current atomically. rollcall-os-sync.timer runs it nightly; keep versions are retained per source, nothing younger than a day is pruned, and a job always pins the exact version it started with. Sources with "track": "pinned" still download new versions but keep current until rollcall os promote <name> <version>. Local files go in with rollcall os import <name> <file.qcow2>. Image freshness is monthly at best upstream; the deploy option -upgrade (package_upgrade) pulls the rest on first boot.

rollcall os list | sync [NAME...] [-force] | import NAME FILE [-family debian|rhel] | promote NAME VERSION | rm NAME VERSION
rollcall deploy ID OS [-version V] [-disk /dev/nvme0n1] [-hostname H] [-upgrade] [-packages a,b] [-user-data FILE] [-boot] [-watch]
rollcall release ID [-wipe quick|full] [-boot] [-watch]     # wipe the disk, back to ready
rollcall jobs ID [-watch] | job cancel ID

States: ready → deploying → deployed (deploy-failed on error; the agent stays up for ssh). A deployed machine's PXE entry defaults to local disk, so boot order can stay "network first" on BIOS hosts; on UEFI hosts the agent adds a boot entry for the installed loader. rollcall recommission or release take it back.

Tags

Tags single out machines for special treatment, as in MAAS. A tag has a name and optionally a match rule, a cloud-config fragment and overlays.

rollcall tags add gpu -match '{{ gt .Node.GPUs 0 }}' -cloud-config deploy/tags/gpu-nvidia.yaml -comment "NVIDIA nodes"
rollcall tags add rack-3 -comment "rack 3, row B"        # manual only
rollcall tag m-2ef1dab828c8 +rack-3 +burn-in -staging     # manual tags on one machine
rollcall list -tag gpu
rollcall deploy tag:gpu rocky-9 -boot                    # every gpu machine
rollcall power tag:rack-3 off

• Auto tags come from the match rule, a Go template over .Node (GPUs, IB GUIDs, CPUs, memory, disks, NVMe, PCI vendor ids, manufacturer, product, OS, existing tags). They are recomputed at every commissioning and whenever a tag definition is saved; manual tags are never touched by rules.
• At deployment the fragments of the machine's tags are appended to the generated user-data as MIME parts (packages, runcmd, write_files merge additively; a #! fragment runs as a script). deploy/tags/gpu-nvidia.yaml installs the NVIDIA driver on Debian, Ubuntu and the RHEL family and reboots.
• For stateless nodes a tag's overlays are applied after the profile's, so a gpu tag can add gres.conf lines or driver modules without a second profile.

Physical location

Every machine can carry building / room / rack / rack unit and an asset tag.

rollcall location m-2ef1dab828c8 -building DC1 -room "Hall A" -rack R12 -unit 24 -asset A-0042
rollcall location tag:gpu -building DC1 -room "Hall B"             # bulk by tag
rollcall location import racks.csv -dry                             # from a DCIM / asset export
rollcall location racks | rack R12 -building DC1 -room "Hall A" -height 48
rollcall list -rack R12

The CSV needs a header; rows are matched by id, serial, mac or node_name and may carry building, room, rack, unit, asset_tag. Racks are created on first use (42U) and can be resized. The web UI shows a location column with building › room › rack chips, a Racks page with elevation views (machines drawn at their U, coloured by state) and bulk "Set location…". Templates and tag rules see .Node.Building, .Node.Room, .Node.Rack, .Node.Unit, so a rack can drive a tag ({{ eq .Node.Rack "R12" }}) or a Slurm topology.conf overlay.

Network and rack controllers

Model

As in MAAS: fabric → VLAN → subnet → IP ranges.

• A fabric is a switched layer-2 domain (ethernet or infiniband).
• A VLAN has a VID (0 = untagged; a partition key on IB), an MTU, and says whether rollcall serves DHCP/PXE on it and which rack controller does (a second one splits the dynamic pool with it).
• A subnet has a purpose (provisioning, mgmt, bmc, storage, ib, other), a gateway, DNS servers and a domain.
• Ranges inside a subnet are dynamic (the DHCP pool PXE and commissioning use), reserved (never handed out: routers, switches, controllers) and static (where machines get their addresses; without one, anything outside dynamic/reserved).
• IPAM records every address handed out (rollcall ip list), pinned ones (rollcall net set ID -static ens18=10.0.0.60) and reserved single addresses (rollcall ip reserve 10.0.0.5 -name switch-1). Addresses a machine already had are adopted when its subnet is defined.

rollcall fabric add hall-a
rollcall subnet add 10.50.0.0/24 -fabric hall-a -vid 0 -purpose provisioning -gateway 10.50.0.1 -dns 10.50.0.1 -domain dc.example
rollcall range add 10.50.0.0/24 reserved 10.50.0.1 10.50.0.20
rollcall range add 10.50.0.0/24 static   10.50.0.50 10.50.0.199
rollcall range add 10.50.0.0/24 dynamic  10.50.0.200 10.50.0.250
rollcall vlan add hall-a 0 -dhcp -rack hall-a-rack1      # this rack controller serves DHCP/PXE here
rollcall subnet add 10.60.0.0/24 -fabric hall-a -vid 200 -purpose storage
rollcall dhcp hall-a-rack1                                 # the dnsmasq configuration it generates

Machine interfaces

A layout describes interfaces in terms that fit many machines: NICs are chosen by selectors (boot, name:X, mac:X, fastest:N, ib:N, all), not by MAC. Interfaces are physical, bond (802.3ad by default) or vlan; each link names a subnet (CIDR, name, or boot) and a mode: auto (an address from the subnet), static (a given one), dhcp or link_up.

{"interfaces": [
  {"type": "physical", "select": "boot", "links": [{"subnet": "boot", "mode": "auto", "default_gateway": true}]},
  {"type": "bond", "name": "bond0", "members": ["fastest:2"], "mtu": 9000, "links": [{"mode": "link_up"}]},
  {"type": "vlan", "parent": "bond0", "vid": 200, "links": [{"subnet": "10.60.0.0/24", "mode": "auto"}]},
  {"type": "physical", "select": "ib:0", "links": [{"subnet": "ib0", "mode": "auto"}]}
]}

rollcall layout add gpu-bond layout.json, then either per machine (rollcall net set ID -layout gpu-bond) or per tag (rollcall tags add gpu … -layout gpu-bond). Without a layout the boot NIC gets an auto address on its subnet; without any subnet model, deployed machines use DHCP as before.

At deployment the layout is resolved against the machine's inventory, addresses are allocated, and two files go into the image next to the cloud-init seed: network-config (cloud-init v2; cloud-init renders it for netplan, NetworkManager or ifupdown) and a udev rule that pins each NIC's name to its MAC, because RHEL-family cloud images boot with net.ifnames=0. Release returns the allocated addresses. rollcall net show ID previews it all.

Verified in the lab: Debian 13 and Ubuntu 24.04 (netplan) and Rocky 9 (NetworkManager), with a static boot NIC and with an active-backup bond carrying VLAN 200.

Region and rack controllers

rollcall serve is the region: database, API, web UI, IPAM, image store. Rack controllers sit next to the machines, one or two per network segment (hall, building, site):

• they serve DHCP and TFTP with dnsmasq on the VLANs assigned to them; the configuration, per-MAC PXE files and host files are computed by the region;
• they run BMC commands (BMC networks are rarely routed to the region);
• they serve boot and OS images from a local cache, filled from the region on first use (kernels and initrds are prefetched, TFTP cannot wait);
• they pass the node API (commissioning, deploy jobs, overlays, phone-home) through to the region and tell it which rack a machine came through.

A rack controller only needs to reach the region: it long-polls its desired state and a command queue. The region host runs an embedded rack controller (rack_name, default its hostname), which is all a single-server installation needs. Remote ones:

rollcall controller join-code -name hall-b -addr 10.0.0.234:443     # on the region: one word, one use, 60 min
# on the rack host (Debian/Ubuntu), from deploy/ with the binary next to it:
./rollcall rack join rollcall-join1-... -url http://10.213.78.1     # writes /etc/rollcall/rack.json + certificate
sh install-rack.sh                                                  # dnsmasq, syslinux, cache dirs, rollcall-rack.service
rollcall controllers                                                # on the region: it shows up online
rollcall vlan add hall-b 0 -dhcp -rack hall-b

dnsmasq is restarted only when its generated configuration changes, and only if it comes back; otherwise the last working configuration is restored (a hand-written DHCP configuration for the same interface is the usual cause: install.sh points it out). A machine that moved to another segment gets rollcall net set ID -rack NAME.

The lab runs both: pxe-server (embedded, 10.213.77.0/24) and pxe-rack2 (VM 213, remote, 10.213.78.0/24 on SDN vnet pxenet2), with node002 behind pxe-rack2 and its virtual BMC on pxe-rack2. Rack ↔ region traffic is mutual TLS (next section), so the BMC passwords of queued commands are encrypted.

Certificate authority and TLS

The region is the installation's certificate authority, as the llmgw control plane is: ca_dir (default /etc/rollcall/ca) holds ca.pem and ca-key.pem (ECDSA P-256, ten years), created on first start.

• HTTPS. The region serves API, UI and images on tls_listen (default :443) with a certificate for every name and address it has plus tls_names; it is reissued when they change or a month before it ends. admin_http decides what plain HTTP may still do with the admin API: allow (default, for compatibility), loopback (the CLI on the region host) or deny. Nodes keep booting over HTTP: firmware and the live image cannot check a certificate before they have one.
• Rack controllers join with a code from rollcall controller join-code: one word carrying the first half of the CA's SHA-256, a one-time secret, an expiry and the region's address. rollcall rack join checks the region against the fingerprint, sends a CSR with the secret and gets a client+server certificate (rack:<name>, a year). From then on every rack call is mutual TLS and the region identifies the rack by its certificate; rollcall controller rm revokes it at once. Racks renew a month before expiry. The old rack_secret is still accepted when configured.
• Updates. Racks follow the region's version: the region names the binary (version, architecture, SHA-256) in each rack's state and serves it over the rack's mutual-TLS channel. The rack stages it in /var/lib/rollcall/update after checking the checksum and that it reports the expected version; rollcall-rack-update.path (root) installs it, restarts the rack and puts the previous binary back if the rack does not register again within a minute (last-result says what happened). Racks on another architecture get rack_binaries/rollcall-linux-<arch>; "auto_update": false in rack.json opts out. rollcall controllers shows each rack's version.
• Admin certificates. Instead of the admin token, a person or laptop can hold a client certificate: rollcall admin-cert request NAME (with the token once) makes a key locally, sends only a CSR and gets admin:NAME back; the CLI and console use it from client.json, and the .p12 it writes goes into the browser's keychain, after which the web UI signs in by itself. rollcall admin-cert list | revoke NAME (revocation takes effect within 30 seconds). Certificates are checked against the CA, the client-auth usage and the serials the region recorded.
• Clients. On the region host the CLI reads the CA from ca_dir; elsewhere ROLLCALL_CA=ca.pem, or the console shows the CA fingerprint on first connect and keeps the CA in ~/.config/rollcall/client.json once you confirm it (rollcall ca show prints it on the region). /ca.pem serves the certificate; the web login links to it.
• Machines trust it: deployments add it with cloud-init ca_certs (allowed on RHEL-family images, where cloud-init marks the module unverified), stateless overlays get it as .CA. rollcall ca issue NAME -host h1,h2 [-client] issues leaves for anything else (Slurm REST, a registry, a web front end).
• Delegation. The root may sign one level of intermediate CAs, each limited by name constraints to the domains and address ranges it serves: rollcall ca intermediate caddy -permit int.example.com,10.213.0.0/16 -csr caddy.csr signs a CSR (the key stays on the host that made it). An ACME server under that intermediate (Caddy's acme_server, step-ca) then issues short-lived certificates to nodes with certbot or acme.sh; everything that trusts the Rollcall CA trusts them, and nothing outside the permitted names can be issued. Roots created before this (path length 0) cannot delegate: rollcall ca rotate -yes replaces the root, keeping the old one as a backup; rack controllers then join again and clients trust the new fingerprint. deploy/tags/acme-cert.yaml is a tag that fetches a node certificate at first boot and renews it.

Power drivers

Every machine's BMC record names a driver; commands run on the rack controller that reaches the BMC network.

Driver	For
ipmi	IPMI 2.0 over LAN (ipmitool lanplus), any vendor; settings cipher (17 on newer BMCs), privilege, interface
redfish	DMTF Redfish, any vendor: system discovered, ResetType chosen from what the BMC allows, boot override once (with If-Match where the BMC wants it)
idrac	Dell iDRAC 8/9 (Redfish, System.Embedded.1)
ilo	HPE iLO 4 (2.30+), 5, 6 (Redfish; no PowerCycle, so ForceRestart; PushPowerButton for soft off on older firmware)
supermicro, xcc, openbmc	Supermicro, Lenovo XClarity, OpenBMC (Redfish)
proxmox	Proxmox VE VMs: API token (user = token id, password = secret), settings node, vmid
manual	no power control; actions say so

After commissioning, a BMC still on IPMI is asked whether it speaks Redfish with the same account; if it does, the driver for its vendor takes over (event bmc driver). An operator's choice is never overridden.

rollcall bmc drivers
rollcall bmc m-1234 -driver idrac -address 10.0.5.21 -user root -password - -verify < pw
rollcall bmc m-1234 -driver redfish -set system=/redfish/v1/Systems/1 -set verify_tls=true
rollcall bmc m-1234 -probe            # detect Redfish again

The lab has lab/pve-vbmc/pve_redfish.py, a Redfish service per Proxmox VM with iDRAC, iLO and generic profiles, next to the IPMI emulator.

IPv6

Subnets can be IPv6 (rollcall subnet add fd00:50::/64 ...). IPAM hands out addresses from static ranges (walked from their start), deployments get them in network-config with a separate default route per family, and the default layout links every subnet of the boot NIC's VLAN, so an IPv6 prefix next to the IPv4 one makes machines dual-stack. Interfaces with planned addresses ignore router advertisements. dnsmasq serves router advertisements and DHCPv6 on IPv6 subnets with dhcp on; the rack offers itself as default router only when it is the subnet's gateway. Host files carry AAAA records, rack controllers report their IPv6 addresses, the region certificate covers them, and region, racks and clients work over IPv6 (https://[fd00::1]).

PXE stays IPv4: syslinux cannot netboot over IPv6, so the provisioning VLAN needs an IPv4 subnet for commissioning and deployment.

Verified in the lab: Debian 13 (with a bond and VLAN), Rocky 9 and AlmaLinux 9 dual-stack on two segments, AAAA lookups through dnsmasq, the admin CLI over https://[fdc3:...].

External IPAM (NetBox; Infoblox-style)

Rollcall works on its own, but at a site with an established network plan the address authority is somewhere else. With ipam in config.json every address Rollcall hands out is registered there first:

"ipam": {
  "provider": "netbox",
  "url": "https://netbox.int.example.com",
  "token_file": "/etc/rollcall/netbox.token",
  "ca_file": "/etc/rollcall/netbox-ca.pem",
  "dns_zone": "int.example.com",
  "sync_interval": "5m"
}

• Allocation asks the authority. An address that exists in NetBox and is not Rollcall's is skipped and the next candidate is tried, so Rollcall never collides with a printer, a VIP or another team's reservation. If NetBox is unreachable, allocation fails instead of guessing.
• Ownership is explicit. Rollcall's records carry the tag rollcall and the machine ID in the custom field rollcall_machine (create both in NetBox; on Infoblox these are an extensible attribute). Records without both are never changed or deleted, only reported.
• Releases reconcile. Releasing, unassigning or deleting a machine frees addresses locally and triggers a reconcile, which also runs every sync_interval: missing records are created, names and owners fixed, and Rollcall-owned records that are no longer in use deleted.
• DNS follows the record. dns_name is <host>.<zone> for a machine's provisioning/mgmt address and <host>-<iface>.<zone> elsewhere (a subnet's domain replaces the zone when it lies inside it; pxe.local stays local). A NetBox-to-DNS sync (PowerDNS here, a host record on Infoblox) publishes it; Rollcall writes one object per address.
• Prefixes are delegated in NetBox. Tag a prefix rollcall; rollcall ipam prefixes lists them and rollcall ipam import creates the missing subnets (VLAN and rack are then set as usual).

rollcall ipam                 # provider, last reconcile
rollcall ipam sync -dry       # what would change
rollcall ipam sync
rollcall ipam prefixes | import

The provider is an interface (reserve, owned records, update, delete, delegated prefixes); the NetBox driver is the first. An Infoblox WAPI driver maps them to record:host/fixedaddress with extensible attributes.

Lab

lab/ documents a Proxmox SDN test setup: an isolated vnet, a PXE server VM running dnsmasq + Rollcall, two diskless VMs, and pve-vbmc, a tiny IPMI-over-LAN BMC emulator that drives VMs through the Proxmox API so that ipmitool power on and chassis bootdev pxe work against virtual machines.

Status

Commissioning, stateless nodes and disk deployment work end to end in the lab (virtual machines with 30 GB disks, SeaBIOS, out-of-band BMC hints). The in-band BMC path and the UEFI boot-entry step are implemented but have not yet been exercised on real hardware.