A Slurm message says whether the node runs slurmctld on the leader's files,
slurmd configless, both or neither, and whether it is lent. The agent
installs munge and Slurm from the machine's sources (22.05 or newer, for
cgroup v2), writes the munge key, starts slurmd through a drop-in with
--conf-server, resumes a lent node that llmgw drained and drains one that is
not, never touching a drain a Slurm administrator made, and reports its
version, slurmd -C, state and jobs in SlurmStatus. Told it has no part, it
stops what it started. New nodes enter slurm.conf drained.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Registration carries what the agent's startup scan found, and a heartbeat
sends the list only when it changed since last sent; so a file deleted
after the agent started came back on a control plane that restarted. The
fingerprint is now forgotten with the provisioning one on every stream.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A sweep counted every file the nodes were asked to delete as freed as soon
as it asked, and a node refused a set's directory as not empty, so tens of
gigabytes were reported freed and nothing was. The agent removes a set's
directory whole (a link only as a link), and the control plane waits for
each node to list its files again, saying what it no longer lists and what
it kept.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each agent measures one core's memory rate beside the whole machine's; the
estimate takes a replica's threads at about one core's rate each, up to the
machine's, calibrated by llama-bench on the PoC. The serve form shows it
beside a card's, warns when slow, and asks for the CPU on purpose when a
reply would take minutes; ctl model plan, the console and serve jobs say
it too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The busy figure is nvidia-smi's utilization.gpu: the share of time any
kernel ran, which a kernel on one SM fills. On cuda01 decode read 92% busy
while the SMs had work 69% of the time and issued on 18% of their cycles.
Busy is now said to be that, and beside it: each card's draw against its
power limit (efficiency table, fleet and node charts, the console's GPU
work chart), and where the profiling counters can be read, SMs active, SM
occupancy, tensor cores and DRAM (llmgw_gpu_*_active_percent), from NVML's
GPM on Hopper and later or a dcgm-exporter on the node
(discovery.dcgm_exporter). The GPU map colours by work by default and keeps
busy as a mode. A MIG instance is never published with its card's profile.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Found running it through the cluster:
- Strata's server starts its engine in a process group of its own, so the
agent saw a GPU replica on the CPU and its 22 GB as somebody else's
memory. A process the shard started, at any remove, is now the shard's.
- An adopted shard's kept compute was sent at once and never again, so a
wrong one read again on adoption never reached the control plane: what
is sent is sent again when it changes, and a GPU shard kept as the CPU
is read again on adoption.
- /metrics/prometheus is llama.cpp's names without the KV cache; vLLM's,
with it, are /metrics?format=prometheus. The router now sees running 1,
waiting 2 under load.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- server init run again on a machine already set up is not refused its
memory (the docs fix a certificate with --host so), and judges count
only when one will be installed (judgeComes: not without a mirror, nor
from a bundle without it).
- A server's sealed secrets that it no longer reads are removed when it is
put or deleted; replacing a credential replaces every header it was
sent, rather than adding one beside the old.
- llmgw.gatewayUrl is a machine setting and restricted in untrusted
workspaces: a cloned repository's settings cannot send a sign-in to
another gateway.
- The bandwidth buffer is at least eight times the CPU's last cache and at
most a quarter of free memory, else nothing is measured until there is
room; a registration carries the figure measured so far.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Seven VMs on one host restarted at once read a third less each than any
gets alone. An agent now waits 10 s to 2 min, at random, before measuring,
and measures again every hour, keeping the best.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Measuring it in the startup scan held every agent half a second or more
before registering, which on a shared CI runner was past the failover
tests' wait. Now it runs once a process, in the background, the first time
it is asked for, and Heartbeat.mem_bandwidth_gbs carries it when known;
the control plane keeps the last figure and a heartbeat without one leaves
it. The agent's tests do not measure.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each agent measures its node's memory read rate when it starts: every CPU
sums a share of a buffer past any cache, a tenth of free memory at most,
the best of four passes, in a fraction of a second; reported in Host
(mem_bandwidth_gbs) and NodeView. A token on a CPU reads every weight it
uses once, so one reply's speed is about that rate over those bytes:
modelplan.CPUTokensPerSecond, 0.68 of the measured rate plus 5 ms a token,
calibrated on the PoC against llama.cpp's predicted_per_second (node01
24.9 GB/s, qwen2.5-1.5b: 14.5 measured, 14.7 estimated; node05 41.9 GB/s,
qwen2.5-14b: 3.3 and 3.2). A model of experts named …-A3B reads its active
part (ActiveShare).
The explorer shows it as CPU tok/s, at Q4_K_M on the fastest node that
holds the model; a repository's page gives it for each GGUF by its size.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Python pickles (.bin, .pt, .pth, .ckpt, .pkl) run whatever they hold when
loaded, as the engine's user, on the node; that is how the malicious models
found on Hugging Face work. The node refuses such a source, or a mirror set
holding one, before fetching anything. A model added with one, or given
one, is refused, while one already in the catalog still loads and is
refused by its node with the same words. vLLM and SGLang downloading a
model by its id get --load-format safetensors. The mirror page marks the
file. allow_pickle: true on a model lets it through on purpose, carried to
the node in EngineProfile.allow_pickle.
BACKLOG M lists the rest: checksums against Hugging Face on every path,
its own scan, trusted publishers, engines without the internet, an eval
before an untrusted model serves.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Measured again after the store fixes. Cutting the store primary's power no
longer hung requests, but leadership moved anyway: the lease had lapsed for
everyone while Patroni promoted the standby, and a standby asked first. The
new leader then spent about 25 s without its nodes, and so without its
judges.
A standby that saw the store out of reach now leaves the lease alone for one
renew round after the store returns. The default lease is 10 s, and a node
detects a control plane that died silently in 8 s (5 s idle, 3 s ping)
rather than 15.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
flux and sf3d on one card handed it to each other, each starting ComfyUI
and loading its weights from nothing (BACKLOG H3, placement side). An
environment of two or more models now gets a hidden catalog entry,
comfyui-env-<name>: on its first member's profiles with the most memory
any member needs, on demand for the longest idle timeout, carrying every
member's weights, repositories and the environment's custom nodes. The
members get no replicas of their own; asking for one wants the entry.
The agent fetches each member's weights; the gate links all of them,
refusing two weights files of one name, links each member's Hugging Face
repository, and answers /v1/models for every member. The control plane
offers the replica under the members' names with each one's workflow and
checkpoint, which the router sends by the model asked for. A member's
sibling never evicts the replica serving it, and the members' load counts
as the entry's.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A job names the catalog model the adapter is for, the safetensors weights to
train on, the node and the MiB of a card it needs, and question/answer pairs.
The control plane sends it when the node's agent is there and nothing else
trains on it; the agent trains with its installed vLLM's torch and a pinned
overlay of peft and accelerate (no second environment), as the engines'
user, on the card with that much free — beside an engine, if it leaves that
much — converts the adapter to GGUF with the installed llama.cpp's own
conversion code when the model is served by llama.cpp, and sends what it
made back in pieces, kept in the store to download. Progress, loss and peak
card memory are reported as it goes; a node that goes fails its job.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
agents.default and agents.nodes.<id> in the cluster's settings hold
everything agent.yaml can say but the agent's id, control planes, address and
certificate, which stay in the file and are refused there. The control plane
sends each node its settings on register and, a second apart, when they
change; an agent whose settings changed checks they load beside its file,
keeps them and starts again on them, engines serving throughout. An edited
agent.yaml that loads restarts the agent too. History, audit, ctl config, the
console and the portal's settings page cover them as the rest of the
settings.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The registration carries each shard's state as it is then. An adopted
engine is health-checked after that, and nothing reported the ready that
followed, so when the agent registered first the control plane kept the
replica starting while it served. After llmgw restart on the PoC two
replicas stayed so, one the only replica of qwen2.5-coder-14b. The
session's watcher now reports every shard the registration called not
ready once it is.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Issue #3 asked for commands to stop and start the system, and 05aa21c gave
only one machine's services. Now:
- llmgw stop sets serving.stopped in the cluster's settings, live: the
reconciler wants every model at no replicas, freeing every GPU, and the
gateway answers every POST under /v1/ with 503 system_stopped. The control
planes, agents and mirror keep running, and no model's definition changes.
- llmgw start clears it; every model is placed again as it asks.
- llmgw restart has every agent restart over its stream (RestartAgent), then
the other control planes over ssh, standbys before a leader, then this
one; engines keep serving.
- llmgw status is the cluster's summary, saying when it is stopped.
One machine's services moved to llmgw service status|start|stop|restart.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Checked against the installed llama.cpp (b10991): at its default verbosity
it prints neither the devices it uses nor the layers it offloads, so the
start-up output said nothing and every replica's ON column stayed empty.
The agent now takes compute from nvidia-smi - the GPUs the shard's processes
hold memory on, and how much - or CPU, for every engine, falling back to it
when llama.cpp's output says nothing; adopted engines get it too, and each
session reports it once per shard as a compute-only status. engine-check
runs its GPU token at -lv 4, where llama.cpp does say where its layers went.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
It was sent once, with READY, and kept only in the leader's memory: a
failover or an agent restart lost it. The agent now keeps it with the
shard's state on disk (ShardSpec.Compute, set by Supervisor.SetCompute) and
reports it with each running shard when it registers (RunningShard.compute),
which adoption carries onto the replica.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
llama.cpp's start-up output is read as a shard becomes ready: the devices it
used, its backend, and the layers it offloaded. That goes up with READY in a
new ShardStatus.compute, is kept on the shard, and is shown by the admin
API, ctl replicas (ON) and the console (COMPUTE). A shard given GPUs whose
engine says it found no usable GPU or offloaded no layer is stopped and
failed, even where nvidia-smi cannot be asked.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
firewall.enabled (default true) is a cluster setting, applied live: the
leader sends a Firewall message to every agent when it registers and when
the setting or firewall_networks changes, and the agent (root) takes llmgw's
nft table out or installs it. A control plane writes the state to
/var/lib/llmgw/firewall.json, which llmgw-firewall-sync.path applies as root
with `llmgw firewall sync`; server init and server add install the units,
`llmgw firewall sync --install` on one set up before. node add and server
add put no firewall on a machine while the setting is off.
`llmgw wipe` removes llmgw from a machine after listing what goes and asking
for its name: units, engines' processes, the nft table, /etc/llmgw,
/var/lib/llmgw, the agent's state, the sudo grant, the CA from the trust
store, keepalived's configuration when llmgw wrote it, and the users.
--models, --store (Patroni member, etcd, or the local database) and --all
take more. The console has it under Do.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The console and ctl on a standby showed its own empty view: nodes and
replicas live in the leader's memory. A standby now passes /api/ to the
leader over the agent port, with the cluster's certificates both ways; the
leader answers only a certificate naming a control plane the store lists,
and only while it leads. Control plane certificates are issued for client
use as well, and server add reissues older ones.
An agent's reconnect backoff starts again after a session that worked, so
each failover it lives through no longer makes the next one slower.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Conflicts with the LoRA work: vLLM's arguments, the engine profile, router
metrics and the scheduler's request all keep both; agent.pb.go regenerated
from the merged proto; the two test fakes of vLLM given separate names.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Plan §7.5 tier 2, opt-in per profile with kv_events. The agent starts vLLM
publishing KV cache events to a loopback port it listens on (pure-Go zmq4,
msgpack in both of vLLM's encodings), with sha256_cbor hashing and a fixed
PYTHONHASHSEED; it mirrors each engine's blocks and sends net changes up the
existing stream, with a full copy on every new one and a reset on gaps,
restarts and clears. The control plane hands them to the router, for the
sending node's own replicas only. The router tokenizes through a replica's
/tokenize, hashes the tokens as vLLM does (checked against cbor2/hashlib
golden values), and scores replicas by the share of leading blocks held,
falling back to the approximate tree. New metrics beside
llmgw_prefix_decisions_total. Untested against a running vLLM.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A vLLM model can carry PEFT adapters, registered at start, or with
max_loaded_adapters held at most N per replica: the router loads an adapter
through vLLM's runtime LoRA API when a request first wants it, sends the
adapter's requests to a replica that holds it while that one is not
saturated, loads each cold adapter once, and unloads the least recently used
idle one to make room. llama.cpp keeps loading every adapter at start.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Conflicts: config imports and docgen sources (both kept); agent.pb.go
regenerated with buf from the merged proto (MIG devices and trace context).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A reconcile pass that does something is a trace, with placement (where it
went, or every candidate turned down), scale-up/down, drain, stop, eviction,
preemption, reaping and restarts beneath it. A replica's start is a span open
from placement until it serves; the start command carries its context in a
new ControlMessage.trace field, and the agent continues the trace through
the weights fetch, engine launch, rendezvous and readiness wait. Stops,
drains, adoption and engine installs are traced on the node, model jobs are
a trace with a span per step linked to the replica's start, and agent.yaml
takes the same tracing block as server.yaml. Off, every span is the no-op one
and commands carry nothing.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Discovery reports a card in MIG mode as its instances instead of the whole
card, on both paths: nvidia-smi (-L names them, -q -x gives their memory,
ids and processes) and NVML (GetMigMode, GetMaxMigDeviceCount,
GetMigDeviceHandleByIndex, behind an interface so it is tested with a fake).
Each instance has its MIG UUID, its own memory, and a class from the card's
and the profile: a100-80g-mig-3g.40gb. Placement numbers instances
1000 + 100 x card + instance and every view shows them as card/migN.
A replica on MIG runs on exactly one instance: a process opens one MIG
device and instances have no NVLink between them, so tp, pp, gpus or nodes
above one on a MIG class are refused in catalog validation and again in
placement, and the planner offers one instance or none. The agent gives
the engine CUDA_VISIBLE_DEVICES=MIG-<uuid> (no Vulkan device variable on
MIG). Memory and processes are per instance; heat, power and wear the
card's; utilisation is left out rather than reported as zero. A card in MIG
mode with nothing carved stays out of placement with the reason, and
llmgw doctor reports each card's mode and instances and warns of the states
in which nothing can run. ctl nodes, ctl status, the console and the plan
count devices by class. docs/install.md has a MIG section.
Written against fakes of nvidia-smi and NVML output; not yet run on MIG
hardware.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
env is an allowlist of tuning families less path, plugin, library, address
and credential names (NCCL_*_PLUGIN, CUDA_INJECTION64_PATH and the like
got through the old denylist); llama.cpp's LLAMA_ARG_* are checked as
flags. args refuse --trust-remote-code, --log-file, --slot-save-path,
--tool-parser-plugin, --middleware, --allowed-local-media-path and others
that read, write or load, and what the agent sets itself. Checked in the
catalog and again on the node before an engine starts.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
server add gives another machine this llmgw, a certificate, the
configuration and store address, lets it into the store through Patroni, and
starts it; --vip keeps a floating address on the leader with keepalived,
following a new /leader endpoint. Nodes learn every control plane from the
leader and notice a dead one by HTTP/2 ping instead of after the kernel's
fifteen minutes. The setup, console, node and init screens are drawn full
screen in one frame: title bar, sidebar, bordered panel, key bar, dialogs.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A card with something else on it when the agent started stayed out of
placement after that process let go of it, until the agent restarted. The
agent now sends what processes other than its own engines hold on each card,
and the control plane replaces the registration verdict with it.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Every minute the agent reads nvidia-smi's full report, its NVLink error
counters and the kernel's XID lines. They are published per card,
shown on the node page and the GPU map, charted in Grafana, and five
alerts watch them.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
They were read once, at agent start, and published unchanged since.
Each sample now carries utilisation, memory and bandwidth in use, the SM
clock and uncorrected ECC errors. The node page charts each card, the
cluster page the fleet by class, Grafana has a GPU row, and three GPU
alerts are added.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
tp on a llama.cpp GPU profile is read as gpus_per_node rather than
refused, and a Hugging Face repository page as a vLLM source as the
repository id, so models written that way are placed after the upgrade
instead of dropped from the catalog. Engines adopted after an upgrade
are checked for computing on their GPUs too.
Refs #2.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
engine_overrides give nodes picked by GPU class, id or labels their own
engine versions; node add --disable-engine keeps one off a node; what
vLLM cannot do on a node is a warning rather than a refused node; the
CUDA requirement follows the version; a hand-named binary is no longer
replaced by an installed one.
Refs #2 (items 4 and 7).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
llama.cpp whose CUDA backend cannot load runs on the CPU without an
error. The CUDA build is now asked for its devices when installed, a
shard on GPUs must hold memory on each before it is ready, and
engine-check reports the devices. Shards get CUDA_DEVICE_ORDER=PCI_BUS_ID
so CUDA numbers GPUs as placement does.
Refs #2 (item 2).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A model's adapters are fetched by each node with its weights and loaded
unapplied at start; a request naming an adapter reaches the model's
replicas with llama.cpp's per-request lora field. Adapter names share the
model namespace, are listed, and follow allowlists on their own. The
router's config seed and pushed catalog now build the name map in one place.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Every agent samples, at most every ten seconds: nvidia-smi's temperature,
HBM temperature, power draw, enforced limit and throttle reasons per GPU;
hwmon's CPU package and board inlet temperatures; and CPU package power
from RAPL's energy counters. Sent with heartbeats, published as metrics
and shown on the node page; unmeasured sensors are absent, never zero.
Observe-only, step 0 of docs/facility-aware-placement.md, which now
describes the agent source and what these readings can and cannot say.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A profile's cpu_cores is reserved out of its node's CPUs by placement, as
memory is, and becomes the engine's thread count. Agents report their CPU
count in registration and heartbeats. New CPU models must declare memory;
model views show reserved against measured memory with warnings, and
ctl model resources sets both for a stored model.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
CPU replicas start on half the machine's CPUs, not all of them: two busy
llama.cpp servers each spinning on all 8 vCPUs fell to 0.8 tok/s apiece,
where at 4 threads they keep 5.5. llamacpp.threads sets it per node.
Inference requests can be traced over OTLP/HTTP (tracing.endpoint), with
admission, schedule and upstream spans and traceparent sent to the engine.
Security: onboarding no longer puts the cluster root in the system trust
store and removes it where it was; the mirror's mutual-TLS API can be
limited to named certificates (--api-client); init.log no longer keeps the
administrator's password; a warning when auth is off on a public listen;
the recorded actor is sanitised and sudo-aware; Ray's dashboard is off, and
the remaining engine gaps are documented.
reconciler.go and agent.go are split by topic, the status mapping of each
failure is tested, and the plan's checklist is brought up to date.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Every upgrade so far has been a script of mine copying a binary to each
machine over ssh, restarting it and polling until it came back — which is
the job, but not something the product could do, and which needed ssh into
every node.
`sudo llmgw ctl upgrade VERSION` on the control plane does it. This machine
first: the release for its platform, checked against the release's
checksums, the old binary kept beside it, llmgw-server restarted, and a wait
until every node that was ready has reconnected. Then each node in turn: the
control plane tells its agent the version over the stream it already holds;
the agent fetches and checks the release itself, swaps it in with a rename,
answers, and exits with status 75 so systemd starts the new binary. Engines
keep running, as for any agent restart, and are adopted again.
A node is done when it is back on the new version, ready, with as many ready
replicas as before; one that is not within the timeout stops the run before
the next node, so a bad release reaches one machine. Nodes already on the
version are skipped, so running it again resumes.
The fetch-and-verify is one package now, shared with onboarding's idea of
what a release version looks like.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
doctor checks a node alone, and every check can pass while two nodes still
cannot reach each other. ctl fabric-test A B asks B's agent for an
ib_write_bw server and A's for the client, adapter by adapter as NCCL pairs
them, one rail at a time, and grades each against its link's rate. It goes
through the agents' streams, so there is no SSH between nodes; the agent
installs perftest the first time, and names the RoCE v2 GID itself.
The result is read from perftest's table by its heading, not a column
number. Agents now list the requests they answer beyond the usual
(Register.features), and the control plane refuses a test on one too old to
answer instead of waiting minutes for it. The forwarding dispatcher carries
the new capability, and its test says so: a missing forward would have made
the command quietly unavailable in production.
Not yet run over real InfiniBand or RoCE; this cluster has neither.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A control plane of this release asks every node for vLLM. An agent of the
last one does not know how to install it, and answered "unsupported", so a
cluster half way through its upgrade showed every node as failing. Agents
now say which engines they can install (Register.installable_engines), and
are asked for no others; an agent that says nothing is asked for llama.cpp
alone, as it always was.
doctor reports the CPU's vector extensions, and warns when AVX2 is missing,
with the fix for a VM: the test node for node add was one, on QEMU's default
CPU model, where llama.cpp runs several times slower and nothing else looks
wrong. node add shows it, since it runs doctor.
The changelog's unreleased section was two releases' worth of sections one
after the other, with two lists of fixes and the upgrade notes in the
middle. It is one entry now: largest changes first, the fixes together, and
every upgrade note at the end, with vLLM's default install and how to keep
your own.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
vLLM was installed by hand and named in each agent's configuration. The
agent now installs it: a Python 3.12 environment built by uv, which is
itself a GitHub release checked against its checksum, from PyPI resolved as
it stood a day after that vLLM was published and installed with
--require-hashes. The resolved list is kept in the environment. The
environment is built relocatable under a scratch name and renamed into place
once it runs, like an archive.
The default is 0.30.0, whose flags were checked against the ones llmgw
builds. It is built for CUDA 13, so it needs driver 580 and a Turing GPU or
newer, and 25 GB free while it installs; a node lacking one says which, and a
node with no GPU skips it without being shown as a fault. gcc comes with it
because Triton compiles its launcher at the first model load. SGLang
installs the same way when the control plane names a version. llmgw doctor
reports whether vLLM can be installed on the node.
Checked by installing 0.30.0 this way on a test node: 7.7 GB, torch 2.13 for
CUDA 13.0, importing cleanly; the node has no GPU, so vLLM was not started.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>