Files
llmgw/internal/agent/config.go
Ilker ManapandClaude Opus 5.5 dc243f8840 The nodes' agent settings kept with the cluster's, agent.yaml down to what an agent needs to start
agents.default and agents.nodes.<id> in the cluster's settings hold
everything agent.yaml can say but the agent's id, control planes, address and
certificate, which stay in the file and are refused there. The control plane
sends each node its settings on register and, a second apart, when they
change; an agent whose settings changed checks they load beside its file,
keeps them and starts again on them, engines serving throughout. An edited
agent.yaml that loads restarts the agent too. History, audit, ctl config, the
console and the portal's settings page cover them as the rest of the
settings.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-08 18:06:36 +02:00

300 lines
10 KiB
Go

package agent
import (
"errors"
"fmt"
"net"
"net/url"
"os"
"slices"
"strings"
"time"
"gitea.mynodes.xyz/ilker/llmgw/internal/agent/discovery"
"gitea.mynodes.xyz/ilker/llmgw/internal/agent/engines"
"gitea.mynodes.xyz/ilker/llmgw/internal/agent/supervisor"
"gitea.mynodes.xyz/ilker/llmgw/internal/control/inventory"
"gitea.mynodes.xyz/ilker/llmgw/internal/obs"
"gitea.mynodes.xyz/ilker/llmgw/internal/tlsconf"
)
// Config configures the agent.
type Config struct {
// NodeID defaults to the hostname. It must equal the common name of the
// agent's certificate, so set it only where the two differ.
NodeID string `koanf:"node_id"`
// Server is the control plane, and Servers is the same thing when there is
// more than one. Both are accepted: every configuration written before
// there could be a second control plane names one address, and none of
// them should have to change.
//
// The order is tried in order, and a refusal moves to the next. Only the
// leader accepts an agent, so a standby is skipped in the time it takes to
// be told so — which is what makes failover a reconnect rather than an
// edit to every node's configuration.
Server string `koanf:"server"`
Servers []string `koanf:"servers"`
// Hostname defaults to the machine's.
Hostname string `koanf:"hostname"`
// MgmtAddr is the address engines are reached on. It defaults to this
// machine's address on the route to the control plane, which is the one
// the control plane and the router can reach.
MgmtAddr string `koanf:"mgmt_addr"`
// Labels are free-form facts about a node for a profile's node_selector.
// Nothing needs them: memory, GPUs, engines and disk are measured, and a
// label restating one of those goes stale the day the machine changes.
Labels map[string]string `koanf:"labels"`
// MgmtInterface is the ethernet interface NCCL bootstraps over. It
// defaults to the interface holding MgmtAddr, then eth0.
MgmtInterface string `koanf:"mgmt_interface"`
// Fabrics labels this node's HCAs. It is explicit on purpose: OpenSM's
// default subnet prefix is the same on every fabric, so nothing can be
// inferred from the wire (plan §5.2).
Fabrics []inventory.FabricAttachment `koanf:"fabrics"`
HeartbeatInterval time.Duration `koanf:"heartbeat_interval"`
// ReconnectBase is the first reconnect delay; it backs off from there.
ReconnectBase time.Duration `koanf:"reconnect_base"`
ReconnectMax time.Duration `koanf:"reconnect_max"`
// AdoptReadyTimeout bounds how long an adopted engine is given to answer a
// health check before the agent stops waiting on it.
//
// Shorter than a startup timeout on purpose: this engine is already
// running, so it is not loading a model, it is either serving or it is not.
AdoptReadyTimeout time.Duration `koanf:"adopt_ready_timeout"`
// TLS authenticates both ends of the control-plane stream. Leaving it unset
// keeps the plaintext behaviour, which only belongs on a trusted network.
TLS tlsconf.Config `koanf:"tls"`
// ModelDirs are the directories this node keeps model weights in, beyond
// WeightsCache, which is always looked in. Storage differs at every installation,
// so llmgw observes it rather than owning it: a Lustre mount, an image
// exported over the fabric, local NVMe and a copy made by hand all look
// identical from here, and placement only needs to know whether the file
// is present.
ModelDirs []string `koanf:"model_dirs"`
// EnginesDir is where the agent installs engines, one directory per
// build. Defaults to /opt/llmgw/engines.
EnginesDir string `koanf:"engines_dir"`
// WeightsCache is where a remote source is downloaded to. Defaults to the
// first entry of ModelDirs, because a node that says where its models live
// has already answered this question, and otherwise to
// /var/lib/llmgw-weights.
//
// Fetching is the simple arrangement: every node keeps its own copy. The
// exotic ones need no code — weights on a shared filer or an image exported
// over the fabric are simply present, and present means nothing is fetched.
WeightsCache string `koanf:"weights_cache"`
Discovery discovery.Options `koanf:"discovery"`
Engines engines.Config `koanf:"engines"`
Superv supervisor.Config `koanf:"supervisor"`
// Tracing sends this node's part of each replica start — the weights
// fetched, the engine launched, the wait for it to answer — to an
// OpenTelemetry collector, inside the control plane's trace of that
// start. Give it the collector server.yaml's tracing names. Off unless
// an endpoint is set here or in OTEL_EXPORTER_OTLP_ENDPOINT.
Tracing obs.Tracing `koanf:"tracing"`
Version string
// Settings is the cluster's settings for this agent it was started on,
// as the control plane sent them: what a newly sent version is
// compared with.
Settings string `koanf:"-"`
}
// DefaultConfig returns sensible defaults.
func DefaultConfig() Config {
// No MgmtInterface: normalize finds the one holding the management
// address, and falls back to eth0 only when it cannot. Defaulted here, it
// was never found — every node said eth0 unless told otherwise, and a node
// on ens3 or bond0 had NCCL bootstrap over an interface it does not have.
return Config{
HeartbeatInterval: 5 * time.Second,
ReconnectBase: time.Second,
ReconnectMax: 30 * time.Second,
AdoptReadyTimeout: 60 * time.Second,
Superv: supervisor.DefaultConfig(),
// NVML gives NVLink topology, so prefer it when this build has it.
Discovery: discovery.Options{PreferNVML: true},
}
}
func (c *Config) normalize() error {
d := DefaultConfig()
if err := c.TLS.Validate(); err != nil {
return err
}
if err := c.normalizeServerURL(); err != nil {
return err
}
// Everything below is found rather than written. A file that has to say
// which machine it is on, and at what address, is a file that differs on
// every node — and a copy taken from one node to the next registers the
// second as the first.
host, _ := os.Hostname()
if c.NodeID == "" {
c.NodeID = host
}
if c.NodeID == "" {
return errors.New("node_id is not set and the hostname could not be read")
}
if c.Hostname == "" {
c.Hostname = host
}
if c.MgmtAddr == "" {
c.MgmtAddr = addrToward(c.Server)
}
if c.MgmtInterface == "" {
c.MgmtInterface = interfaceOf(c.MgmtAddr)
}
if c.MgmtInterface == "" {
c.MgmtInterface = "eth0"
}
// The directory downloads land in is always one that is looked in. When
// they were two settings, a node could fill its disk with fetched weights
// that placement never saw — which is what every node here was doing.
if c.WeightsCache == "" && len(c.ModelDirs) > 0 {
c.WeightsCache = c.ModelDirs[0]
}
if c.WeightsCache == "" {
c.WeightsCache = DefaultWeightsCache
}
if !slices.Contains(c.ModelDirs, c.WeightsCache) {
c.ModelDirs = append(c.ModelDirs, c.WeightsCache)
}
if c.HeartbeatInterval <= 0 {
c.HeartbeatInterval = d.HeartbeatInterval
}
if c.ReconnectBase <= 0 {
c.ReconnectBase = d.ReconnectBase
}
if c.AdoptReadyTimeout <= 0 {
c.AdoptReadyTimeout = d.AdoptReadyTimeout
}
if c.ReconnectMax < c.ReconnectBase {
c.ReconnectMax = max(c.ReconnectBase, d.ReconnectMax)
}
return nil
}
// normalizeServerURL makes the configured address a URL connect can use, and
// refuses the combination that would quietly undo the certificates: a scheme
// that says plaintext while TLS is configured. Silently connecting anyway would
// mean a cluster believing it has mutual authentication when it has none.
func (c *Config) normalizeServerURL() error {
// One list, however it was written. Server first when both are given,
// because an operator adding a standby to an existing file expects the
// one already there to stay preferred.
all := make([]string, 0, 1+len(c.Servers))
if c.Server != "" {
all = append(all, c.Server)
}
all = append(all, c.Servers...)
seen := map[string]struct{}{}
out := make([]string, 0, len(all))
for _, s := range all {
fixed, err := normalizeOne(s, c.TLS.Enabled())
if err != nil {
return err
}
// A duplicate would be tried twice in a row on failover, which reads
// as the rotation not working.
if _, dup := seen[fixed]; dup {
continue
}
seen[fixed] = struct{}{}
out = append(out, fixed)
}
if len(out) == 0 {
return errors.New("server is required")
}
c.Servers = out
c.Server = out[0]
return nil
}
// DefaultWeightsCache is where fetched weights go when nothing says otherwise.
const DefaultWeightsCache = "/var/lib/llmgw-weights"
// addrToward is this machine's address on the route to the control plane.
//
// The address engines are reached on is whichever one the control plane can
// reach, and the kernel already knows which that is: a UDP "connection" picks
// the source address for the route without sending a packet. Asking the
// interfaces instead would have to guess among docker bridges, VPNs and
// link-local addresses.
func addrToward(server string) string {
u, err := url.Parse(server)
if err != nil || u.Host == "" {
return ""
}
host := u.Hostname()
port := u.Port()
if port == "" {
port = "443"
}
conn, err := net.Dial("udp", net.JoinHostPort(host, port))
if err != nil {
return ""
}
defer conn.Close()
if a, ok := conn.LocalAddr().(*net.UDPAddr); ok {
return a.IP.String()
}
return ""
}
// interfaceOf names the interface that holds an address, or "" when none does.
func interfaceOf(addr string) string {
ip := net.ParseIP(addr)
if ip == nil {
return ""
}
ifaces, err := net.Interfaces()
if err != nil {
return ""
}
for _, ifc := range ifaces {
addrs, err := ifc.Addrs()
if err != nil {
continue
}
for _, a := range addrs {
if n, ok := a.(*net.IPNet); ok && n.IP.Equal(ip) {
return ifc.Name
}
}
}
return ""
}
// normalizeOne applies the scheme rules to a single address.
func normalizeOne(addr string, secure bool) (string, error) {
switch {
case strings.HasPrefix(addr, "https://"):
if !secure {
return "", fmt.Errorf("%s is an https:// address but no tls certificates are configured", addr)
}
case strings.HasPrefix(addr, "http://"):
if secure {
return "", fmt.Errorf("tls is configured but %s is an http:// address; use https://", addr)
}
case strings.Contains(addr, "://"):
return "", fmt.Errorf("server %q must be an http:// or https:// address", addr)
case secure:
return "https://" + addr, nil
default:
return "http://" + addr, nil
}
return addr, nil
}