Commit Graph
4 Commits
Author SHA1 Message Date
Ilker ManapandClaude Opus 5.5 daed835d88 Measure each node's CPU and memory, and give every node a page
The nodes are CPU machines, and nothing measured how busy one was: the
heartbeat carried GPU memory and disk, and llmgw_node_memory_bytes is the
total. The agent now reads /proc between heartbeats - CPU across all
cores, load averages, memory used and available, and each engine's
process group's cores and resident memory - and sends it with the
heartbeat. Nothing new runs on the nodes and Prometheus needs no new
target: the control plane exports it with the rest of the fleet, as
llmgw_node_cpu_utilization_percent, llmgw_node_cpus, llmgw_node_load,
llmgw_node_memory_used_bytes, llmgw_node_memory_available_bytes,
llmgw_shard_cpu_cores and llmgw_shard_memory_bytes. A measurement more
than a minute old is left out rather than repeated.

The cluster page's node table shows CPU and RAM as bars, and each node
links to a page of its own: current CPU, RAM, load and disk, the engines
on it with their cores and memory, and an hour of CPU, RAM, load,
per-model cores and memory and queue depth from Prometheus. It refreshes
in place.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-09-28 23:21:23 +02:00
Ilker ManapandClaude Opus 5 753f4e3265 Let a node say how much room it has left
Disk was the one resource nothing reported. `statfs` was already being called
on every model directory, but only to ask whether the filesystem was a network
one — the free space it returns in the same struct was thrown away. So the
only way to find out why a node was filling up was to ssh to it, which is what
this system exists to avoid.

Reported per filesystem rather than per configured directory. Free space
belongs to the disk, not the path: two model directories on one disk are one
pool of bytes, and counting them separately would let the control plane add
24 GB to 24 GB and place a 40 GB model on a node that has 24.

Shared filesystems are summed separately from local ones and left out of a
node's own total. Space on a filer belongs to everyone mounting it, so twenty
nodes would otherwise each report the same free terabyte, and a scheduler
would place twenty models into room for one.

Nothing reported means nothing is known, everywhere: an agent too old to send
storage and a node with no model directories both send nothing, and both must
read as unknown rather than as a full disk. `ctl nodes` and the dashboard show
a dash, the metric is absent rather than zero, and a missing directory — which
is what an unmounted filer looks like — is skipped rather than reported as
having no space.

Shown as free out of total, because the first is useless without the second:
8 GB free is comfortable on a 10 TB filer and nearly full on a 10 GB root
partition, and only the second stops a model being placed.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-09-18 09:38:57 +02:00
Ilker ManapandClaude Opus 5 b619546516 Stop trusting hardware facts that were never checked
Three places where the system took the infrastructure's word for something
and would have failed silently on real hardware.

A declared fabric adapter that is not on the node. Fabric membership has to
be configuration — OpenSM's default subnet prefix is identical on every
fabric, so a matching prefix proves nothing — but taking it entirely on
trust was a different mistake. A typo, or a card that enumerated
differently after a reboot, produced NCCL_IB_HCA naming an adapter that
does not exist.

An adapter with no ACTIVE port. Physically linked with no subnet manager
sits in INIT: it looks healthy to anything counting adapters, carries no
data, survives a reboot, and looks like a software problem. Discovery had
recorded port state all along and placement only ever asked whether a
fabric had any adapters listed.

Both end the same way — the replica starts, passes its health checks, and
hangs on its first all-reduce, which is the failure the fabric invariant
exists to prevent arriving through a door nobody was watching. The agent
now compares declared against discovered, where both are visible for the
only time, and does not advertise a fabric that cannot carry traffic. The
reason is logged on the machine that knows it, because the operator who
typed the adapter name is the only person who can fix it. The fabric's rate
is the slowest active link, since a collective runs at the speed of its
slowest.

And NVLink topology, which no published binary could see. NVML is its only
source, the bindings need cgo, and CGO_ENABLED=0 is deliberate so the
portable binary runs on an older libc. The cost was silent: tensor groups
fall back to the lowest free indices, which is right on an SXM board with
NVSwitch and wrong on a PCIe box where bridges pair specific cards — a
group straddling two of them runs several times slower and nothing says so.
Releases now also publish an nvml build for those nodes, and
llmgw_gpu_nvlink_peers makes the difference visible: a flat zero across a
fleet means the topology is unknown rather than absent.

A test that declared mlx5_0 and mlx5_1 on a node whose sysfs held neither
had been passing, because nothing compared the two.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-09-17 17:29:15 +02:00
Ilker ManapandClaude Opus 5 42fd0aa31e Export what the cluster is made of, not only what it is serving
The router published twenty-two metric families about requests, endpoints,
admission and scoring — everything about traffic and nothing about the
machines carrying it. There was no way to graph GPU usage, watch a node go
unhealthy, see a fabric fill up, or answer "was the cluster full at the
time", which is the first question anyone asks after an incident. The
agents exported nothing at all.

Exported by the control plane rather than by each agent. It already holds
every number: hardware arrives at registration and state on each heartbeat,
so this is a map read away. One scrape target for a fleet of hundreds, no
Prometheus configuration per node, no firewall rule per machine, and
nothing new running on the nodes. On the same /metrics as the traffic
figures, because correlating "the cluster was full" with "requests were
queueing" should not need two systems.

A collector rather than gauges kept current by a ticker: the numbers are
derived from state that already exists, so computing them when asked is
simpler than maintaining a copy that can drift, and nothing runs between
scrapes.

GPU utilisation is new, and is the number people actually watch. Memory
used says a model is loaded; this says whether it is doing anything, and a
fleet at ninety percent occupancy and two percent utilisation is a fleet
holding models nobody is asking for.

Adding it caught two things. utilization.gpu goes last in the nvidia-smi
query and is optional, because a driver too old to know it returns a
shorter row — requiring it made an llmgw upgrade silently stop discovering
GPUs on an older node, which is far worse than not knowing how busy a card
is. And I gave the new protobuf field number 14, which ecc_errors already
had; buf lint is why that was a moment rather than a corrupted wire format.

Absent is kept distinct from zero throughout, for the same reason as
everywhere else here: an unreported utilisation shown as a flat zero reads
as an idle fleet rather than a missing measurement, and a replica nothing
has reported would be the most idle thing in the cluster.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-09-17 15:09:27 +02:00