A card with something else on it when the agent started stayed out of
placement after that process let go of it, until the agent restarted. The
agent now sends what processes other than its own engines hold on each card,
and the control plane replaces the registration verdict with it.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Every upgrade so far has been a script of mine copying a binary to each
machine over ssh, restarting it and polling until it came back — which is
the job, but not something the product could do, and which needed ssh into
every node.
`sudo llmgw ctl upgrade VERSION` on the control plane does it. This machine
first: the release for its platform, checked against the release's
checksums, the old binary kept beside it, llmgw-server restarted, and a wait
until every node that was ready has reconnected. Then each node in turn: the
control plane tells its agent the version over the stream it already holds;
the agent fetches and checks the release itself, swaps it in with a rename,
answers, and exits with status 75 so systemd starts the new binary. Engines
keep running, as for any agent restart, and are adopted again.
A node is done when it is back on the new version, ready, with as many ready
replicas as before; one that is not within the timeout stops the run before
the next node, so a bad release reaches one machine. Nodes already on the
version are skipped, so running it again resumes.
The fetch-and-verify is one package now, shared with onboarding's idea of
what a release version looks like.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A GB200 NVL72 rack or an NVLink Switch system is a scale-up island: its
GPUs reach each other over NVLink whatever node they are in. Each GPU
now reports its fabric from nvidia-smi -q - state, status, ClusterUUID,
CliqueId, bandwidth - at registration and once a minute after, since a
fabric manager restarting drops every card out at once; and each node
reports nvidia-imex and its channels, without which the domain's GPUs
cannot share memory across nodes. A single machine's NVSwitch, which
reports a cluster of zeros, is no domain.
A replica spanning nodes is placed inside one domain first, on nodes
whose every card is joined and whose IMEX is up, and its shards are
told NCCL_MNNVL_ENABLE=1; InfiniBand is the fallback.
/admin/nvlink draws each domain as a rack - the NVLink Switch band on
top, light running down a backplane, trays of GPU chips that glow when
joined, pulse red when not, turn amber on degraded bandwidth - and
lists what keeps a tray out. A node's page shows its GPU-by-GPU NVLink
matrix, each card's NUMA node and nearest adapter, and its domain and
IMEX. doctor checks joining, bandwidth, IMEX and its channel; metrics
llmgw_gpu_nvlink_joined and llmgw_imex_up; /api/v1/nvlink.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A port's state was read once, at registration: one that went down later
left its node on the fabric, offered multi-node work that would hang on
its first collective, until somebody restarted the agent. The agent now
re-reads every IB and RoCE port on each heartbeat - state, physical
state, rate and the error and data counters - and when the fabrics it
can carry traffic on change, says so once; the control plane replaces
the node's fabrics, which is what placement reads.
The ports are exported as llmgw_ib_port_active (with state and
phys_state, so an unplugged cable reads differently from a missing
subnet manager), llmgw_ib_port_rate_gbps and llmgw_ib_port_counter_total,
and a node's page lists them with the fabric each carries and any error
counter that is not zero.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The nodes are CPU machines, and nothing measured how busy one was: the
heartbeat carried GPU memory and disk, and llmgw_node_memory_bytes is the
total. The agent now reads /proc between heartbeats - CPU across all
cores, load averages, memory used and available, and each engine's
process group's cores and resident memory - and sends it with the
heartbeat. Nothing new runs on the nodes and Prometheus needs no new
target: the control plane exports it with the rest of the fleet, as
llmgw_node_cpu_utilization_percent, llmgw_node_cpus, llmgw_node_load,
llmgw_node_memory_used_bytes, llmgw_node_memory_available_bytes,
llmgw_shard_cpu_cores and llmgw_shard_memory_bytes. A measurement more
than a minute old is left out rather than repeated.
The cluster page's node table shows CPU and RAM as bars, and each node
links to a page of its own: current CPU, RAM, load and disk, the engines
on it with their cores and memory, and an hour of CPU, RAM, load,
per-model cores and memory and queue depth from Prometheus. It refreshes
in place.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Seeing what a node did meant ssh through a jump host, to a machine whose
address nobody remembers, to read a journal only root may open. When an
engine install failed on a new node today, the reason was one line — and it
was four steps away from the page that said the install had failed.
Each node's row on the cluster page now links to its logs: the agent's own,
and every engine running there, chosen from the list the node itself sends.
The page can follow, refreshing every five seconds, and is on both the admin
listener and /admin. `llmgw ctl logs NODE [--source SHARD] [-n N]` reads the
same.
They travel over the stream the agent already holds, so they need nothing
the control plane does not already have: a request goes down, the lines come
back, and a reply that does not come in ten seconds is an agent too old to
answer. The agent keeps its last 2000 lines in memory as well as writing them
wherever it did before; the engines' last few hundred lines were already kept
and sent only when one crashed.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Every agent file on the cluster named its own node, its own address, the
path to llama-server and two weight directories — different on every node,
kept true by hand, and not true: node05 carried "ram: 32g" beside a measured
31 GB, looked for weights in an empty directory while fetching them into
another, and the other four never looked in theirs at all, so four nodes
reported no disk. Growing a node's RAM would have gone unnoticed, because
memory was read once, at registration.
The agent now finds these out. Its id is the hostname, which is also the
certificate's common name. Its address is the one on the route to the
control plane, which the kernel picks for a UDP dial without sending
anything. llama-server is looked for on PATH and then where release archives
are unpacked. A missing nvidia-smi is a node without NVIDIA cards rather
than a failed discovery — which also cut discovery short before InfiniBand
on every CPU node not told to skip GPUs. Fetched weights land in
/var/lib/llmgw-weights by default, and wherever they land is always looked
in.
Memory is read on every heartbeat, and installed engines are probed again
each minute and sent when they change, so a VM given more RAM or a node
given vLLM becomes a candidate without anyone restarting its agent. The
control plane logs both changes, since "the node now qualifies" is the
answer to why a model placed an hour after it was asked for.
What is written still wins. The agent file shrinks to the control plane's
addresses and the TLS files, the same on every node; onboarding writes only
the overrides it was given. What cannot be found stays configuration: which
fabric an adapter is on, because OpenSM's default prefix is the same on all
of them.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Found by answering "where can we see this live". `ctl weights` was offering a
file for deletion that I had deleted two days earlier, and the node's disk
figure was the one it had when its agent started. Discover() is called at
registration and nowhere else, so both were frozen.
Disk is a fact about a moment, not about a machine. Sampled once, the figure
is wrong on exactly the node worth watching — the one busy filling up — and it
stays wrong until that agent restarts. The heartbeat already refreshes GPU
memory for the same reason, with a comment about noticing a foreign process
"after registration"; disk belonged beside it and I did not put it there.
The stale list cut both ways. A model fetched after registration was invisible
until a restart, so placement could not prefer the node that had just spent ten
minutes downloading it, and the disk check could not see the space it used.
Storage goes in every heartbeat, being a few numbers per filesystem. The file
list goes only when a fingerprint of paths and sizes changes, with a flag
saying the list is meant — without that, an empty list would be ambiguous
between "this node now holds nothing" and "nothing to report", and the second
reading would empty a node's inventory five seconds after it registered.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>